Zhuzhou HGtool Tungsten Carbide Co.,Ltd.
Zhuzhou HGtool Tungsten Carbide Co.,Ltd.
Add to Cart
Cemented / Tungsten Carbide Wire Drawing Dies Flat Thread Rolling Dies
Product Description:
Instruction of wire drawing dies
The tungsten carbide drawing die adopts high-quality hard alloy as its core, with high hardness, good thermal conductivity, and low friction coefficient. In the process of using, it shows good corrosion resistance and impact resistance, and applicable to the drawing of black metal, large size wire, and which the drawing condition is worse.
In order to make the use of tungsten carbide drawing dies more efficient, there are five points for attention:
1. The choice of equipment;
2. Pretreatment of wire material;
3. Choosing appropriate lubricant;
4. Exception handing;
5. Change fossilized dies in time.
Products show:
Reference Drawings:
Grade and Applications:
| Grade | Hardness HRA | TRS N/ mm² | Density g/ cm³ | Applications recommended |
| YG6X | 92 | 1800 | 14.9 | It can be used to make steel wires, non-ferrous metal wires or bars material with less than 6.0mm diameter. |
| YG6 | 90.5 | 2000 | 14.9 | It can be used for steel wires, non-ferrous metal and alloy bars under 20mm diameter, and can also be used for drawing pipes with diameter of less than 10mm. |
| YG8 | 90 | 2200 | 14.7 | Can be used in steel, non-ferrous metal and alloy bars and pipes, also can be used in manufacturing machinery parts, tools and vulnerable parts. |
| YG8.2 | 89 | 2000 | 14.6 | |
| YG8L | 89 | 2000 | 14.6 | |
| YG11 | 88.5 | 2300 | 14.4 | It can be used for high compression steel rods and steel pope drawing, and the top hammer, perforation and stamping dies of working under greater stress. |
| YG16 | 87 | 2600 | 14.0 | |
| YL50 | 87 | 2600 | 14.4 | |
| YG20 | 85 | 2800 | 13.6 | It can be used for stamping die, such as punching watch parts, stamping battery shell, tooth paste mould, small size steel ball, screw, nut, etc. |
| YG20C | 83.5 | 2800 | 13.6 | It can be used in standard parts, bearings, tools and other industries. |
| TL40.4 | 82 | 3000 | 13.3 | It can be used in standard parts, bearings, tools and other industries for cold forging, cold pressing, cold pressing mould, warhead and shell stamping dies. |
Our Services:
In order to guarantee the customers are able fully to operate the machine, if the customer need, we can help customer training, includes:
1. Correct operating mode;
2. Correct maintenance way;
3. Remove simple problem;
All the products of our company have already been widely used in metal products area.
Any doubt Please contact us.