Zhuzhou HGtool Tungsten Carbide Co.,Ltd.
Zhuzhou HGtool Tungsten Carbide Co.,Ltd.
Add to Cart
K10 Tungsten carbide inserts are suitable for finishing of cast iron and Manganese steel
Grade: YG8/K20/K30 (We can offer other grade, too)
Type: we can accept customized type
Brand: HGalloytool
Material: tungsten carbide
ISO9001
Long life,smooth cutting,high hardness,great wear-resistance
We understand that trusted threading solutions are key across all manufacturing industries. Our range of tapping, thread milling and thread turning tooling products are from trusted, experienced supply partners to ensure that we have the solution for your application.
Through advanced manufacturing technology, we are able to offer a wide range of geometries with ground finish as an option. Our portfolio includes a comprehensive selection of cemented carbide grades for different applications.
| ISO Code | Grand | Physical and mechanical properties | Applications recommended | ||
| Density g/cm3 | Hardness No Less Than HRA(HV) | TRS No Less Than (Mpa) | |||
| K05 | YG3 | 15 | 90.5 | 1300 | Suitable for finishing of cast iron and nonferrous metal. |
| K10 | YG6X | 14.8 | 91 | 1560 | The finishing& semi-finishing of cast iron and nonferrous metals and also for the machining of manganese stell and hardening steel. |
| YG6A | 14.7 | 91.5 | 1510 | ||
| K15 | YG6 | 14.9 | 89.5 | 1670 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| K20 | YG8 | 14.6 | 89 | 1840 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| M10 | YW1 | 13 | 91 | 1290 | Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel |
| YW3 | 12.9 | 92 | 1390 | ||
| YW4 | 12.3 | 92 | 1390 | ||
| M20 | YW2 | 12.9 | 90.5 | 1460 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the maching of railway wheel hubs. |
| P10 | YT05 | 12.6 | 92.5 | 1260 | Suitable for the finihing and semi-finishing if steel and cast steel with a moderate feed rate and a rather high cutting speed. |
| YT15 | 11.3 | 91 | 1300 | ||
| P20 | YS14 | 11.4 | 91.5 | 1550 | Suitable for the finishing and semi-finishing of steel and cast steel. YS25 is specially used for the milling of steel and cast steel. |
| YT14 | 11.4 | 90.5 | 1400 | ||
| YS25 | 13 | 90.5 | 1780 | ||